Mail Telephone Telephone

laser safety window P1P21 (3mm)

The laservision laser safety window 000.P1P21.2007 (with a thickness of approx. 3-3.2mm) is a gold-colored laser protection window with a scratch-resistant coating. It is certified acc. three standards: EN 207; EN12245 and EN 60825-4). Due to the high ODs in the UV and blue range (OD10+ from 180 to 458 nm; OD8+ >458-462nm), the broad and high protection level within the NIR (OD5+ from 815nm to 1100nm; OD8+ from 880nm to 1075nm, and OD10+ from 940 to1055nm) and in the infrared area (OD8 + from 5230 to 14570 nm), the window is suitable for high power diodes as well as for disk, Nd: YAG, fiber or with CO2 lasers. The gold-colored laser safety window is 600x450mm in size and has good color vision and VLT of appr. 50%. The maximum size can be 2000 x 1150mm. The thickness is about 3mm.

  • Order number: 000P1P212007
  • GTIN: 4050369053786
  • Pack unit: 1 pieces
  • Weight incl. packaging: 0,97 kg
  • Weight excl. packaging: 0,97 kg
available standard sizes (mm)
Product number: 000P1P212007
Product information "laser safety window P1P21 (3mm)"
The laser safety window P1P21 consists of a light gold-colored, absorbing plastic with a scratch-resistant coating and a thickness of 3-3.2mm. The protection is based on the absorption of laser radiation in the material itself. The window has a daylight transmission of approx. 50% and therefore a very good visual brightness and good color recognition.To ensure safe use in a wide range of conditions, small and large beam diameters in machines or enclosures. The P1P21 laser safety window is certified according to DIN 207, EN 12254 and 60825-4. Especially the following protection levels are of particular note: DIN 207: 10s:        >315-464nm D LB6 + IR LB8 + M LB8Y                             880-1075nm D LB6 + IR LB8 + M LB8Y EN12254: 100s:     >315-464 D AB6 + I AB8 + R AB7 + M AB8Y      &
Protection range
ultraviolett
Protection within the ultraviolet spectral range between 180 and 400nm
visible
Protection within the visible spectral range between 400 and 700nm
near infrared
Protection within the near infrared spectral range between 700nm and 1400nm
Infrared
Protection in the infrared spectral range above 1400nm
Coating: Anti-scratch on both sides
Colour: gold
Filter material: Plastic
Filter technology: Absorption filter
Filter thickness: 3,1mm
Protection Class / Norm: EN 207 full protection, EN 12254, EN 60825-4
Protection range: Infrared, near infrared, ultraviolett, visible
VLT (approx.): 50%
Visual brightness: Very good
colour recognition: Good
200-469nm | 102 kW/m2 | T2 | tmax = 105s
850-1084nm | 102 kW/m2 | T2 | tmax = 105s
4700-25000nm | 102 kW/m2 | T2 | tmax = 105s
Wavelength (NM) OD
180 - 460 (OD10+)
>460 - 464 (OD8+)
>464 - 466 (OD6+)
780 - <800 (OD3+)
800 - <815 (OD4+)
815 - <835 (OD5+)
835 - <860 (OD6+)
860 - <880 (OD7+)
880 - <905 (OD8+)
905 - <940 (OD9+)
940 - 1055 (OD10+)
>1055 - 1065 (OD9+)
>1065 - 1075 (OD8+)
>1075 - 1081 (OD7+)
>1081 - 1090 (OD6+)
>1090 - 1100 (OD5+)
>1100 - 1110 (OD4+)
4780 - 5050 (OD5+)
5230 - 14570 (OD8+)

Attention: The following data are given on the basis of EN 12254 and the approximate measured values ​​from the official test reports. If repeated, results may differ due to a different test laser / setup / implementation. Only the certified protection levels apply

Wavelength
Test condition / protection level
Required power or energy density
Beam diameter d63 Pulse duration tp Pulse rate
Measured average power
Corresponds to the measured protection level
248 nm D AB9 1,0x106 W/m2 1,0 mm 40 ns 25 Hz 3,7 W 1,4 x D AB9
248 nm R AB4 3,0x105 J/m² 1,0 mm 40 ns 10 Hz 1,9 W 1,3 x R AB4
266 nm M AB6Y 3,0x1016 W/m² 0,5 mm 60 fs 1 kHz 40 mW 2,0 x M AB6Y
1030 nm D AB7 1,0x107 W/m² 1,0 mm cw cw 28 W 3,5 x D AB7
1064 nm I AB8 5,0x105 J/m² 1,0 mm 0,4 ms 10 Hz 0,8 W 1,1 x I AB8
1064 nm R AB7 5,0x104 J/m² 1,0 mm 10 ns 10 Hz 0,3 W 4,3 x R AB7
1064 nm M AB8Y 1,5x104 J/m² 0,5 mm 12 ps 50 kHz 3,25 W 1,0 x M AB8Y
1070 nm D AB6 2,5x107 W/m² 1,0 mm cw cw 20,4 W 1,0 x D AB6
5000 nm M AB6Y 1,0x1017 W/m² 0,8 mm 90 fs 1000 Hz 1,1 W 4,3 x M AB6Y
10600 nm D AB3 1,0x106 W/m² 1,0 mm cw cw 0,95 W 1,2 x D AB3
10600 nm I AB3 1,0x105 J/m² 1,0 mm 20 ms 10 Hz 0,215 W 1,5 x I AB3
10600 nm R AB3Y 1,0x105 J/m² 1,0 mm 900 ns 100 Hz 0,810 mW 1,0 x R AB3Y
WAVELENGTH (NM) OD OPERATING MODE / TESTED PROTECTION LEVEL
180 - 315 (OD10+) D LB10 + IR LB4 + M LB6Y
>315 - 464 (OD8+) D LB6 + IR LB8 + M LB8Y
>464 - 468 (OD6+) DIRM LB6
780 - <800 DIRM LB3
800 - <815 DIRM LB4
815 - <835 DIRM LB5
835 - <860 (OD6+) DIRM LB6
860 - <880 DIRM LB7
880 - 1050 DR LB7 + I LB8 + M LB8Y
880 - <905 (OD8+) D LB6 + IR LB8 + M LB8Y
905 - <940 (OD9+) D LB6 + IR LB8 + M LB8Y
940 - 1055 (OD10+) D LB6 + IR LB8 + M LB8Y
>1050 - 1075 D LB6 + I LB8 + R LB7 + M LB8Y
>1055 - 1065 (OD9+) D LB6 + IR LB8 + M LB8Y
>1065 - 1075 (OD8+) D LB6 + IR LB8 + M LB8Y
>1075 - 1081 D LB6 + IRM LB7
>1075 - 1082 (OD7+) D LB6 + IRM LB7
>1081 - 1090 DIRM LB6
>1090 - 1100 (OD5+) DIRM LB5
>1100 - 1110 (OD4+) DIRM LB4
4780 - 5050 DI LB3 + R LB3Y + M LB5Y
>5230 - 14570 DI LB3 + R LB3Y + M LB6Y